Basic Info.
Model NO.
CuNi30
HS Code
7408229000
Production Capacity
2000 Tons/Year
Product Description
CuNi30 Nickel copper alloy strip low Resistance alloy
Cuni30 Alloy Strip/ Cupronickel Strip/Sheet
Material: CuNi5 CuNi10(C70600) CuNi20 (C71000) CuNi25(C71300), CuNi30(C71500) in from of sheet/plate/strip
Thickness: 0.1~1.5 width: 610Max
CuNi30Fe1/C71500 Strip/sheet
Product Description
CuNi23Mn low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
Chemical Content, %
Mechanical Properties
Resistance Alloy- CuNi30Mn Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft
Wire diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm
Enameled condition is available
Cuni30 Alloy Strip/ Cupronickel Strip/Sheet
Material: CuNi5 CuNi10(C70600) CuNi20 (C71000) CuNi25(C71300), CuNi30(C71500) in from of sheet/plate/strip
Thickness: 0.1~1.5 width: 610Max
CuNi30Fe1/C71500 Strip/sheet
Product Description
CuNi23Mn low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
Chemical Content, %
| Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
| Cd | Pb | Hg | Cr | ||||||
| 30 | 1.0 | - | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
| Max Continuous Service Temp | 350ºC |
| Resisivity at 20ºC | 0.35%ohm mm2/m |
| Density | 8.9 g/cm3 |
| Thermal Conductivity | 10(Max) |
| Melting Point | 1170ºC |
| Tensile Strength,N/mm2 Annealed,Soft | 400 Mpa |
| Tensile Strength,N/mm2 Cold Rolled | Mpa |
| Elongation(anneal) | 25% (Max) |
| Elongation(cold rolled) | (Max) |
| EMF vs Cu, μV/ºC (0~100ºC) | -37 |
| Micrographic Structure | austenite |
| Magnetic Property | Non |
Resistance Alloy- CuNi30Mn Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft
Wire diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm
Enameled condition is available
