HDPE Plastic Foaming Masterbatch Pigment Granule

High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.

 

Type: Virgin & Recycled
Grade: Film Grade,Injection Grade, Blow molding Grade, Extrusion Grade, Pipe Grade.......ect.
Color: Natural, Transparent,white, red,yellow,black....ect.
Place of Origin:China

Properties:
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of
0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness

 

Item	Test method	Test Date	Date Unit
Density	ASTM D-1505	0.958	g/cm³
Melt Flow rate	ASTM D-1238	0.35	g/10min
Elongation at Break	ASTM D-638	320	Kg/cm
Tensile strength at Yield	ASTM D-638	280	Kg/cm

Main Usage:
Injection Moulding , Blow Moulding, Spin Dyeing, Casting, Extrusion Moulding, Blown Film, Foaming etc.
1. Fiber (Carpet,Textiles,Upholstery, etc.)
2. Film (shopping bags, casting film, multilayer film, etc.)
3. Blow Molding (Medical & Cosmetic container,Lubricant & Paint container, etc.)
4. Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
5. Injection Molding(Automotive, Electronic, Construction, House wares, Furniture, Toys, etc.)